Is Trisiloxane Comedogenic?

Trisiloxane is the ingredient that makes your primer glide on like silk and disappear within minutes, and it is also the name that makes acne prone readers pause. It sounds chemical, it sits high on a lot of primer and sunscreen labels, and it belongs to the silicone family that so many people blame for breakouts.

The short answer is reassuring, with a useful twist. Trisiloxane rates 1 out of 5 on the comedogenic scale, which puts it at the low end, and most references describe it as non-comedogenic. It is a volatile silicone, which means it evaporates after you apply it instead of staying on your skin. The twist is that evaporation is exactly why a trisiloxane product can still break you out: the carrier leaves, but everything it carried stays behind, and that is where the real culprits live.

Quick Answer

Trisiloxane is rated 1 out of 5 on the comedogenic scale, the second lowest score. It is a short chain linear silicone, also called octamethyltrisiloxane, that evaporates within minutes of application, so it does not sit on the skin long enough to block a pore.

One honest note belongs with that number. The 1 is a secondary chart consensus, not a value from the original Fulton testing: I searched the full text of the original Fulton 1989 tables and trisiloxane does not appear in them at all. A single number never describes a finished product.

The one caveat is what stays behind. Trisiloxane is a carrier: it delivers pigments, UV filters, oils and waxes evenly across your skin, then it evaporates. If those rate high, they clog your pores, and the trisiloxane gets blamed for a breakout it did not cause.

1/5
Comedogenic Rating

Low risk, and it evaporates within minutes

A short chain volatile silicone that carries your primer evenly, then leaves, with the real risk sitting in the ingredients it leaves behind.

What Trisiloxane Actually Is

Trisiloxane is a laboratory made silicone, also known as octamethyltrisiloxane and abbreviated L3 or MDM. Its chemical formula is C8H24O2Si3 and its CAS number is 107-51-7. Structurally it is a short, straight chain of three siloxane units capped with eight methyl groups. That short chain is the whole story: short chains evaporate, long chains stay and form films.

It is a clear, lightweight, colourless liquid with very low viscosity, about 1.0 cSt, roughly the thickness of water. Its official functions are antifoaming agent, skin conditioning agent, solvent, and spreading and levelling agent. In plain language, it stops bubbles during manufacturing, helps a product spread evenly, and carries other ingredients into place before flashing off.

It is the delivery system, not the moisturiser, which is why it shows up in products that need to glide on, dry fast and feel weightless: primers, fluid foundations, sunscreens, hair serums and leave in conditioners, facial masks, moisturisers and anti aging creams. Redken Blow Dry Express Primer lists trisiloxane early in its formula. It contains no fatty acids, so it cannot feed the Malassezia yeast behind fungal acne.

Its Comedogenic Rating, Explained

On the widely used 0 to 5 comedogenic scale, trisiloxane is rated 1, the second lowest band. Glooshi lists it at 1 out of 5: it mostly evaporates after application, so it does not sit on the skin long enough to block pores, and its molecules are too large to sink deeply. Deascal lists the related ethyl trisiloxane and carboxydecyl trisiloxane at 1 out of 5 as well. Our silicones hub collects the site’s silicone ratings: dimethicone 1, cyclopentasiloxane 0, phenyl trimethicone 1, amodimethicone 1, dimethicone crosspolymer 1.

The ratings quoted online trace back to older rabbit ear tests from the 1980s, and rabbit skin is far more reactive than human skin. Trisiloxane was not part of that testing, so no Fulton value exists to quote. Secondary charts assign it 1 by analogy with other volatile silicones and by the evaporation mechanism itself. Our guide to what comedogenic means and our comedogenic scale explained cover those limits in full. For comparison, mineral oil rates 0 and coconut oil rates 4.

Do not let a brand page rewrite the scale. Note that “non comedogenic” has no regulated definition: brands assign it themselves. Believe the rating and the full formula, not the front label claim.

Why It Evaporates Instead of Clogging

A pore clogs when something stays inside it long enough to mix with sebum and dead skin. Trisiloxane does not get that chance.

First, volatility. Trisiloxane is a volatile methyl siloxane, which means it turns from liquid to vapour at skin temperature and leaves the surface within minutes. Something that has left your skin cannot block a pore.

Second, size. Even while it is still on the skin, its molecules are too large to sink deeply into a follicle, which further reduces clogging risk.

Third, it is not a food source and it is not reactive: it contains no fatty acids, so it does not feed the yeast involved in fungal acne, and it is chemically inert. Dermatologist Dr Teo Wan Lin makes the same point for silicones generally: they are inert and incapable of clogging pores on their own.

Trisiloxane vs Dimethicone vs Cyclopentasiloxane vs Dimethicone Crosspolymer

These four silicones show up together so often that readers treat them as one ingredient. They are not: trisiloxane and cyclopentasiloxane are volatile carriers that evaporate, dimethicone is a linear fluid that stays and forms a light film, and dimethicone crosspolymer is an elastomer gel that stays and blurs pores.

PropertyTrisiloxaneDimethiconeCyclopentasiloxaneDimethicone Crosspolymer
What it isLinear volatile silicone, L3Linear silicone chainCyclic volatile silicone, D5Silicone elastomer gel
StructureStraight chain, 3 unitsLong straight chainRing of 5 unitsCrosslinked gel network
VolatilityEvaporates in minutesStays on skin for hoursEvaporates in minutesStays on skin for hours
Main jobCarrier, spreadability, fast drySmoothing film, barrier supportCarrier, spreadabilityBlurring, smoothing primer feel
What is left behindAlmost nothingLight breathable filmAlmost nothingSoft, powdery, blurring film
Rating1 out of 51 out of 50 out of 51 out of 5

The rule is simple: the two that leave rate 0 or 1, and the two that stay rate 1. What matters far more is what the carrier leaves behind. Our dimethicone guide, cyclopentasiloxane guide and dimethicone crosspolymer guide cover each one.

Why It Is in Primers, Sunscreens and Hair Products

If you have ever wondered how a primer can feel like silk and dry in seconds without grease, trisiloxane is usually a large part of the answer. It is the carrier that makes the product spread thin and even, then it evaporates and leaves the pigments and powders where they belong.

In sunscreens, the same spreading job matters even more. A sunscreen only works if it covers the skin evenly, and trisiloxane helps UV filters spread into a thin, uniform layer.

In hair products, it does the same job on a different surface: it spreads along the hair shaft, adds slip so hair combs easily, and evaporates as the hair dries, leaving shine without weight.

The Real Culprits When a Trisiloxane Product Breaks You Out

This is the honest limit of the 1. Trisiloxane itself rarely clogs a pore, but the formula it carries can. Here are the real culprits, in order of likelihood.

The ingredients left behind. Trisiloxane delivers its cargo and leaves. If a primer also contains isopropyl myristate, which rates 5, or coconut oil, which rates 4, those ingredients stay on your skin after the carrier evaporates. The trisiloxane did not clog your pore. The ingredient it delivered did. Our guide to makeup ingredients that clog pores lists the usual suspects.

Heavy layering. A primer, then foundation, then setting powder, then sunscreen is a lot of product sitting on the skin all day. Each layer is light on its own, but together they slow the escape of sebum and sweat and create the warm micro environment where comedones form more easily. The carrier evaporated hours ago. The layers did not.

Incomplete removal. Trisiloxane itself washes off easily, but the film formers, pigments and waxes it delivered do not always come off with a single gentle wash. Sleeping in a full face of primer and foundation gives them hours inside your follicles.

Fragrance and irritants. Many primers and sunscreens that use trisiloxane also contain fragrance, essential oils or drying alcohols. Irritation can look like a breakout. If a product stings or leaves you red, the problem is usually an irritant, not the carrier.

Hair product transfer. Trisiloxane is common in hair serums and blow dry primers, and hair products do not stay on the hair. They transfer to the forehead, the hairline and the temples, especially in heat and humidity, and the rest of the formula can sit against the skin at the hairline for hours. Our guide to hair products causing acne covers this pattern.

Mistaken identity. The name on the label may not be plain trisiloxane at all. Drometrizole trisiloxane is a UV filter, trimethyl pentaphenyl trisiloxane is a heavier silicone, and ethyl trisiloxane is a related volatile silicone. Paste the exact name from your label into the checker.

The carrier is not the enemy. What it leaves behind is. Judge the full ingredient list, not the trisiloxane alone, and remove the rest of the formula properly at night.

Where You Will Find It

Primers are its home territory: check any silky, fast drying primer and you will usually find trisiloxane near the top, often with dimethicone, dimethicone crosspolymer and silica. Fluid foundations use it for the same glide, sunscreens use it to spread UV filters evenly, and hair serums use it for slip and shine.

It also appears under related names that are not the same ingredient. Drometrizole trisiloxane is a UV filter, trimethyl pentaphenyl trisiloxane is a heavier silicone, ethyl trisiloxane is a related volatile silicone, and PEG-8 trisiloxane is rated 0. Paste the exact name from your label into the free checker.

Who Should Use It

Oily and acne prone skin can usually use it without worry: a volatile carrier that evaporates and rates 1 adds little pore clogging risk. The rule is to judge the rest of the formula, not the carrier. A primer of trisiloxane plus dimethicone crosspolymer plus silica is a very different product from one of trisiloxane plus isopropyl myristate plus coconut oil.

Dry skin benefits too, because the carrier helps moisturisers and serums spread evenly without grease, although it is not a moisturiser on its own. Sensitive skin should check the blend first: the ingredient itself is generally described as non irritating and fragrance free, but primers often contain fragrance, so a plain, fragrance free product is the low risk version. Very acne prone skin should patch test on one cheek for several days.

5 Common Mistakes People Make With Trisiloxane

1. Treating a 1 as a guarantee and ignoring the formula. Always judge the full ingredient list.

2. Blaming trisiloxane for a breakout caused by what it delivered. High rated esters or heavy oils stayed on your skin after the carrier evaporated.

3. Confusing it with its trisiloxane cousins. Drometrizole trisiloxane, trimethyl pentaphenyl trisiloxane and ethyl trisiloxane are separate ingredients.

4. Assuming silicone free is automatically safer. A silicone free primer can still contain heavy esters or fragrance that clog far more than any volatile carrier.

5. Forgetting the hairline. A hair serum with trisiloxane evaporates from the hair, but the rest of the formula can transfer to the forehead and hairline.

How to Check Your Own Products

Look for Trisiloxane on the label and note its position: near the top of a primer or sunscreen, it is doing the main spreading work. Then look at what sits around it: fragrance and high rated esters change the verdict far more than the carrier does.

Trisiloxane next to dimethicone and dimethicone crosspolymer is the classic primer team, and it is a good sign. Next to isopropyl myristate, which rates 5, it is a different story. The fastest check is the one this site exists for: paste the full ingredient list into the free Pore-Clogging Checker. Learn how to read INCI lists if the label looks like a foreign language, and read how to tell if skincare is clogging pores if you are already breaking out. For the full reference, see the full ingredients list and the silicones hub.

Check Your Product Before You Trust One Ingredient

Trisiloxane is rated 1, but your product is a whole formula. Paste the full ingredient list into the free Pore-Clogging Checker and see every pore clogging risk in seconds.

Check My Ingredients Free

Frequently Asked Questions

On its own, yes. It is rated 1 out of 5 and evaporates within minutes. Whether a specific product suits you depends on the rest of the formula.

By itself, it is not expected to. It evaporates after application rather than staying on the skin. Breakouts are usually caused by the ingredients it delivered and left behind, by heavy layering, or by sleeping in unwashed makeup.

No, but they are close cousins. Both are volatile silicones that evaporate after application. Trisiloxane is a linear chain of three units and rates 1 out of 5, while cyclopentasiloxane is a ring of five units and rates 0 out of 5.

No. Dimethicone is a long linear silicone that stays on the skin for hours and forms a light film, while trisiloxane is a short chain that evaporates within minutes. Both rate 1 out of 5, but they earn that rating in opposite ways.

Because it is a carrier. It helps the primer spread thin and even, dries fast, and leaves a silky finish without grease. Once it evaporates, the pigments and powders it delivered stay in place.

It is not a food source for the Malassezia yeast involved in fungal acne, because the yeast feeds on fatty acids and it contains none. That makes it reasonable in a fungal acne routine, but it does not make a whole product safe.

The Bottom Line

Trisiloxane earns its 1 honestly: a short chain volatile silicone that spreads your primer evenly, then evaporates within minutes and leaves almost nothing behind. The 1 comes from secondary charts and the evaporation mechanism behind them, not from Fulton testing, because trisiloxane does not appear in the Fulton 1989 tables at all. Remember the names: trisiloxane leaves and rates 1, cyclopentasiloxane also leaves and rates 0, dimethicone stays and rates 1, and dimethicone crosspolymer stays and rates 1.

Check your product before you trust one ingredient. Trisiloxane is rated 1, but your product is a whole formula. Paste the full ingredient list into the free Pore-Clogging Checker and see every pore clogging risk in seconds.

This article is for educational purposes only and does not constitute medical advice. If breakouts persist or worsen, consult a qualified dermatologist.