Is Amodimethicone Comedogenic?
Amodimethicone is the silicone most people meet in the shower, not on the skincare shelf. It is the conditioning agent in rinse-out conditioners, leave-in treatments, and hair serums, and it is the reason damaged hair feels smooth again after one wash. So when it shows up on a conditioner label, the question is fair: does it clog pores?
In This Article
- Quick Answer
- What Amodimethicone Actually Is
- Its Comedogenic Rating, Explained
- Why It Rates 1
- Amodimethicone vs Dimethicone vs Cyclomethicone
- The Hair to Skin Transfer Problem
- Water Solubility and Buildup, Explained
- Where You Will Find It
- Who Should Be Careful
- 5 Common Mistakes
- How to Check Your Own Products
- Frequently Asked Questions
- The Bottom Line
Quick Answer
Amodimethicone is rated 1 out of 5 on this site, the low risk band on the comedogenic scale. It is a large molecule silicone that sits on the surface of hair and skin rather than slipping into pores, and it carries no fatty acids that could feed the yeast involved in fungal acne.
That 1 describes the ingredient on its own. A conditioner or leave-in built around amodimethicone can still contribute to breakouts along the forehead, hairline, and neck, not because amodimethicone clogs pores, but because the product transfers to skin and the other ingredients in the formula do the clogging.
What Amodimethicone Actually Is
Amodimethicone is an amine-functionalized silicone, a modified form of dimethicone that carries amino groups (NH and NH2) on its silicon and oxygen backbone. Its INCI name is simply Amodimethicone, and its CAS number is 71750-80-6. It is supplied to manufacturers as an emulsion, and its established cosmetic function is hair conditioning and antistatic care.
The amino groups are what make it different from plain dimethicone. In the acidic environment of a conditioner, the amine groups become positively charged, while damaged hair is negatively charged, because its protective outer layer wears off with bleaching and heat styling. Opposite charges attract, so amodimethicone is drawn to the damaged sections of hair and sticks there far more strongly than to healthy sections.
That selective stickiness is the point of the ingredient. It deposits where hair is damaged, smooths the cuticle flat, seals moisture inside the shaft, and improves wet and dry combing.
On a label it appears plainly as Amodimethicone.
Its Comedogenic Rating, Explained
On the widely used 0 to 5 comedogenic scale, amodimethicone is rated 1, the same low band as dimethicone and phenyl trimethicone, and one step above the volatile silicones cyclomethicone and cyclopentasiloxane at 0. Our silicones hub lists amodimethicone at 1 out of 5, and the independent references agree.
| Source type | Rating given | Basis |
|---|---|---|
| Site’s own Silicones hub | 1 | Low risk on skin, mostly a hair ingredient |
| Glooshi, PEG-8 amodimethicone | 1 | Large silicone molecule sits on the surface, PEG units help it rinse away |
| Glooshi, amodimethicone copolymer | 1 | Large inert silicone, stays on the surface, rarely triggers breakouts |
| COSMILE Europe, amodimethicone entry | No comedogenic effect | Silicones form vapor-permeable films and are well tolerated on skin |
| Incidecoder ingredient entries | No number assigned | Listed as an emollient; dimethicone on the same pages is listed at 0 to 1 |
| EWG Skin Deep (hazard score, not comedogenicity) | 1 to 2 out of 10 | General hazard score, not a pore clogging rating |
No number in that table is a lab measured fact about your conditioner bottle. The ratings quoted online trace back to older testing, including rabbit ear tests from the 1980s, and rabbit skin is far more reactive than human skin. There is no single universally validated consumer scale that assigns every ingredient a dependable facial breakout probability. A rating of 1 is strong reassurance, not a guarantee. Our guide to how the comedogenic scale works covers those limits.
Why It Rates 1
Four properties explain the low rating.
First, size. Amodimethicone is a large polymer molecule, too big to slip inside a pore, so it stays on the surface of hair and skin, forming a thin film. Pores clog when something stays inside them long enough to mix with sebum and dead skin, and a surface film does not get that chance.
Second, selective deposition. Because the positive charge pulls it toward damaged hair, amodimethicone concentrates on the hair shaft, not on skin. A rinse-out conditioner is mostly washed away, and what remains is bound to hair, so the amount that ever sits on facial skin is small.
Third, no fatty acids. Amodimethicone is a synthetic silicone polymer built on silicon and oxygen. It contains no fatty acids, so it cannot feed Malassezia, the yeast involved in fungal acne.
Fourth, the film is vapor permeable. Like other silicones, the amodimethicone film lets oxygen and water vapor pass through. It does not suffocate skin, and it does not trap sebum underneath it the way a heavy occlusive layer can.
Amodimethicone vs Dimethicone vs Cyclomethicone
Readers often treat all silicones as one ingredient. They are a family with different jobs.
| Property | Amodimethicone | Dimethicone | Cyclomethicone |
|---|---|---|---|
| What it is | Amine-functional silicone, positively charged | Linear silicone chain, uncharged | Blend of cyclic silicones D4, D5, D6 |
| Main job | Selective hair conditioning | Smoothing film, barrier support | Volatile carrier, spreads products thin |
| Volatility | Non-volatile, stays on hair | Non-volatile, stays on skin for hours | Volatile, evaporates in minutes |
| Where you find it | Conditioners, leave-ins, hair serums | Moisturizers, primers, serums, sunscreens | Primers, serums, sunscreens, hair products |
| Feel | Silky, smooth, no heavy coating | Silky cushion, substantive film | Light, dry, fast spreading slip |
| Comedogenic rating | 1 out of 5 | 1 out of 5 | 0 out of 5 |
| Buildup | Resists buildup, repels further deposition | Can layer with repeated use | None, it evaporates |
| Water soluble | No, once deposited as a film | No | No |
The practical rule is simple: dimethicone is the skin silicone, cyclomethicone is the carrier that leaves, and amodimethicone is the hair silicone that sticks where hair is damaged. All three rate 0 or 1, and the differences between them are about where they work, not about pore risk.
For the full picture, read our dimethicone guide, our cyclomethicone guide, our cyclopentasiloxane guide, and our phenyl trimethicone guide.
The Hair to Skin Transfer Problem
If amodimethicone rates 1, why do so many people with forehead breakouts blame their conditioner? Because the ingredient is not the whole story. The product is.
Hair products cause acne through transfer, and dermatologists have called the pattern pomade acne since it was first described clinically in 1970. Conditioners, leave-in treatments, and hair oils sit on your hair, and your hair touches your forehead, temples, hairline, and neck all day. Sweat carries residue down, and at night your hair rests on your pillowcase while your face rests on the same pillowcase.
Leave-in products are the highest risk category. A rinse-out conditioner is mostly washed away. A leave-in conditioner, heat protectant, or hair serum stays on your hair, and on any skin your hair touches, for hours or days.
Residue survives rinsing. A 2020 proof of concept experiment in one person detected residue from a shampoo and conditioner regimen on skin up to two hours after rinsing, and residue from a leave-in styling product for up to four hours.
The formula partners are the real suspects. A conditioner that lists amodimethicone often lists other ingredients beside it: coconut oil at 4, isopropyl myristate at 5, heavy fragrance, or lanolin derivatives. Those ingredients transfer to skin too, and they carry far more pore risk than the silicone. The classic pattern is a cluster of small whiteheads or skin colored bumps along the hairline, temples, or the back of the neck. If your breakouts sit mostly at the hairline while the rest of your face is clear, hair products are the most likely explanation. Our guide to hair products causing acne explains the full pattern.
Water Solubility and Buildup, Explained
Search amodimethicone and you will find two opposite claims: that it is water soluble and rinses off easily, and that it is not water soluble and builds up. Both are half true, and the confusion comes from mixing up the product in the bottle with the film on your hair.
Amodimethicone itself is not water soluble. It is supplied to manufacturers as a mixture that disperses readily in water, which is how it gets into a conditioner bottle. But once it deposits onto the hair and dries into a crosslinked film, that film is not water soluble, and water alone will not remove it.
What saves amodimethicone from the buildup problem is its charge. Because the strands carry a positive charge, they repel each other. Amodimethicone already stuck to the hair repels extra strands that try to latch on, so the film does not keep getting thicker with every wash.
To remove it fully you need a shampoo containing a sulfate or cocamidopropyl betaine surfactant. That is a practical concern mainly for people who wash with conditioner only.
Where You Will Find It
Amodimethicone is primarily a hair care ingredient. You will find it in rinse-out conditioners, especially for damaged, bleached, or color treated hair; leave-in conditioners and detangling sprays; hair serums and smoothing oils; heat protectants; and anti-frizz shampoos and conditioners.
Who Should Be Careful
Oily and acne prone skin can generally tolerate amodimethicone itself. The ingredient rates 1, it does not feed fungal acne yeast, and it does not stay in pores. The care is about the product around it, not the silicone.
If your breakouts cluster along the hairline, forehead, or neck, audit your hair products before your skincare. Keep leave-ins off the skin, apply them to the lengths and ends, and wash your face after rinsing conditioner out.
Very dry or damaged hair is the best fit for amodimethicone. That is the hair it was designed for, and the selective deposition means it helps exactly where hair is weakest. Healthy, fine hair may not need it.
Sensitive skin should check the blend before the silicone. Amodimethicone itself is generally described as non-irritating and well tolerated.
5 Common Mistakes People Make With Amodimethicone
1. Blaming amodimethicone for a breakout caused by its formula partners. It rates 1 and sits on the surface. If your conditioner also contains coconut oil at 4 or isopropyl myristate at 5, those stayed on your skin.
2. Believing the water soluble claim. Amodimethicone disperses in water in the bottle, but the film it forms on hair is not water soluble. If you wash with conditioner only, it will accumulate.
3. Applying leave-ins to the roots and hairline. Leave-in products have the longest skin contact of any hair product. Keep them on the lengths and ends.
4. Assuming silicone free is automatically safer. A silicone free conditioner can still contain coconut oil, heavy esters, or fragrance that clog or irritate far more than amodimethicone would.
5. Expecting it to moisturize skin. Amodimethicone is a hair conditioner, not a skin moisturizer. In skin care it is a minor emollient.
How to Check Your Own Products
Look for Amodimethicone on the label and note its position and its product type. Near the top of a rinse-out conditioner, it is doing the main conditioning work. In a leave-in, it stays on your hair and your skin far longer, so the product type matters more than the position.
Then look at what sits around it: coconut oil, isopropyl myristate, lanolin, and heavy fragrance change the verdict far more than the silicone does. The fastest check is the one this site exists for: paste the full ingredient list into the free Pore-Clogging Checker and it will flag every ingredient with a pore clogging risk. For the full reference, see the pore-clogging ingredients list and the silicones hub, and read what comedogenic means to understand the scale.
Check Your Product Before You Trust One Ingredient
Amodimethicone is rated 1, but your product is a whole formula. Paste the full ingredient list into the free Pore-Clogging Checker and see every pore clogging risk in seconds.
Check My Ingredients FreeFrequently Asked Questions
On its own, yes. It is rated 1 out of 5, it is a large molecule that stays on the surface, and it contains no fatty acids. Whether a specific hair product suits your acne prone skin depends on the rest of the formula and on how much of it reaches your forehead and hairline.
By itself, it is not expected to. It is a large, inert silicone that stays on the surface of hair and skin rather than sinking into pores. Breakouts linked to amodimethicone products are usually caused by the other ingredients in the formula, or by leave-in residue transferring to skin.
No. Amodimethicone is a modified dimethicone carrying amino groups, which give it a positive charge and make it stick selectively to damaged hair. Dimethicone is the plain linear silicone used mainly on skin. Both rate 1 out of 5.
No. It is supplied as a water dispersible emulsion, which is where the claim comes from, but once it deposits on hair and dries into a film it is not water soluble.
Not directly, but hair products containing it can contribute. Leave-in residue transfers to the forehead, hairline, and neck through contact and sweat, and the other ingredients in the product may clog pores.
The Bottom Line
Amodimethicone earns its 1 honestly: a large molecule, amine-functional silicone that sticks selectively to damaged hair, resists buildup, forms a vapor permeable film, and carries no fatty acids. On skin it is low risk, and on hair it is one of the better conditioning ingredients available.
This article is for educational purposes only and does not constitute medical advice. If breakouts persist or worsen, consult a qualified dermatologist.