Is Cyclomethicone Comedogenic?

Cyclomethicone is the name that confuses readers most on a skincare label, because it is not one ingredient at all. It is the older catch-all name for a family of volatile cyclic silicones, D4, D5 and D6, and it shows up in primers, serums, sunscreens and hair products. If you worry that silicones clog pores, this is the name to understand first, because the whole family rates 0 out of 5.

The answer is simple, but the name hides it. Cyclomethicone and cyclopentasiloxane are often treated as two different ingredients, when one is the family name and the other is its best known member. Once you know that, the label starts making sense, and so does the 0.

Quick Answer

Cyclomethicone is rated 0 out of 5 on the comedogenic scale, the lowest score it gives. It is a volatile silicone: it spreads a product thin, carries the other ingredients across your skin, then evaporates within minutes, leaving no residue behind to clog a pore.

Cyclomethicone is not one ingredient. It is a catch-all name for a blend of volatile cyclic silicones, mainly D4, D5 and D6, and cyclopentasiloxane (D5) is one component of that blend, not the same thing as the blend. Our cyclopentasiloxane guide covers D5 alone.

A rating describes one ingredient, not a finished product: a primer built on cyclomethicone can still break you out if the rest of the formula contains high rated esters or fragrance, or if you sleep in it without cleansing.

0/5
Comedogenic Rating

The lowest score, and it evaporates

A volatile cyclic silicone family that spreads a product thin and leaves within minutes, with nothing of its own left behind to clog a pore.

What Cyclomethicone Actually Is

Cyclomethicone is a silicone, a synthetic polymer built on silicon and oxygen rather than carbon. Its molecules form rings rather than chains, and it is a clear, odourless liquid that gives products their slip and smooth glide.

On a label, cyclomethicone is the older trade name for the cyclic silicone family. Modern labels often name the members instead, usually cyclopentasiloxane (D5) or cyclohexasiloxane (D6), sometimes cyclotetrasiloxane (D4). The second name is simply more specific about which member is inside; for your pores, the difference does not matter.

Cyclomethicone is a volatile carrier: it spreads the other ingredients evenly across your skin, then evaporates at skin temperature, leaving the heavier ingredients behind in a thin, even layer. It delivers the product, then it departs. It is not an oil or a fat, it contains no fatty acids, so it cannot feed the Malassezia yeast involved in fungal acne, and its large molecules do not penetrate pores.

The D4, D5 and D6 Blend

Each number counts the repeating siloxane units in the ring. D4, cyclotetrasiloxane, is the smallest and lightest member, with four units. It evaporates the fastest and gives the driest, lightest feel. D5, cyclopentasiloxane, is the best known member, with five units. It is the one you will see named on its own most often, and it is usually the largest single part of a cyclomethicone blend. D6, cyclohexasiloxane, is the heaviest member, with six units. It evaporates more slowly, so it stays a little longer and gives a slightly richer slip before it leaves.

A blend labelled cyclomethicone behaves like its members: it spreads thin, feels light and dry, and evaporates within minutes. The exact mix varies by product, and the label rarely tells you the proportions. That is fine for your purposes, because all three members share the behaviour that matters for pores: they are volatile, they leave no residue of their own, and they rate 0.

Its Comedogenic Rating, Explained

On the widely used 0 to 5 comedogenic scale, cyclomethicone is rated 0, the lowest band. Incidecoder lists cyclomethicone with comedogenicity 0 and irritancy 0, and JAAD-derived rating lists give it 0 to 1. Our silicones hub lists cyclomethicone at 0 out of 5, alongside cyclopentasiloxane at 0 and below dimethicone at 1. For comparison, mineral oil is rated 0 and coconut oil is rated 4.

Know what a 0 can and cannot promise. The ratings quoted across the internet trace back to older testing, including rabbit ear tests from the 1980s, in which ingredients were applied to rabbit ears and follicle plugging was measured. Rabbit skin is far more reactive than human skin, and there is no single universally validated consumer scale. A rating of 0 is therefore strong reassurance, not a guarantee, and it should always be read with the full formula and your own skin’s response. Our guide to how the comedogenic scale works covers those limits in more detail.

Do not let a brand page rewrite the scale. “Non comedogenic” has no regulated definition, and brands assign it themselves without standardized testing. Believe the rating and the full formula, not the front label claim.

Why It Evaporates Instead of Clogging

When you apply a primer or serum built on cyclomethicone, the blend spreads across the skin in a layer so thin you can barely feel it, carrying the pigments, actives, or heavier silicones with it. Then, within minutes at skin temperature, it turns to vapour and leaves. What remains is whatever it was carrying: a dimethicone film, a pigment layer, or a sunscreen filter. The cyclomethicone itself is gone.

That is why a 0 makes sense here. A pore clogs when something stays inside it long enough to mix with sebum and dead skin and block the follicle, and an ingredient that evaporates within minutes does not get that chance.

Keep the mechanism in proportion. Evaporation explains the ingredient, not the product. A primer that uses cyclomethicone as its carrier can still contain isopropyl myristate at 5 or fragrance high on its list, and those ingredients stay behind after the cyclomethicone leaves. The formula around it is what decides your breakout risk.

Cyclomethicone vs Cyclopentasiloxane vs Dimethicone

Cyclomethicone is the family name. It covers the blend of cyclic silicones D4, D5 and D6, usually mostly D5. It is volatile, it evaporates, and it rates 0. Cyclopentasiloxane is one member of that family: D5, the five membered ring, named on its own. It is the same ingredient whether the label calls it cyclopentasiloxane or includes it inside a cyclomethicone blend, and it rates 0. Our cyclopentasiloxane guide covers it in full.

Dimethicone is the opposite in every practical respect. It is a linear silicone, a long chain rather than a ring, and it is non-volatile. It stays on the skin for hours and forms a thin, flexible, breathable film that smooths texture and reduces water loss, which is why it is the workhorse of moisturisers and barrier creams, and why our dimethicone guide rates it 1. In most premium formulas the two are blended on purpose: cyclomethicone carries the system and flashes off, while dimethicone provides the lasting conditioning film.

PropertyCyclomethicone (blend)Cyclopentasiloxane (D5)Dimethicone
What it isBlend of cyclic silicones D4, D5, D6Single cyclic silicone, five membered ringLinear silicone polymer chain
VolatilityVolatile, evaporates in minutesVolatile, evaporates in minutesNon-volatile, stays on skin for hours
Main jobCarrier and spreadabilityCarrier and spreadabilitySmoothing film and barrier support
FeelLight, dry, fast spreading slipLight, dry, fast spreading slipSilky cushion, substantive film
Comedogenic rating0 out of 50 out of 51 out of 5
Best fitPrimers, serums, sunscreens, hair productsPrimers, serums, sunscreens, colour cosmeticsMoisturisers, barrier creams, smoothing serums
Environmental noteD4 and D5 restricted in EU rinse-off productsD5 restricted in EU rinse-off productsNo equivalent restriction

The practical rule is simple. If the label says cyclomethicone, read it as the family, and if it says cyclopentasiloxane, read it as one member of that family. Both rate 0. Dimethicone is the different one, and the one that stays.

Where You Will Find It

Primers are its home territory. A silicone primer is usually a blend of cyclomethicone as the volatile carrier and a heavier silicone, often dimethicone crosspolymer, as the blurring film. The cyclomethicone spreads the crosspolymer into a thin, even layer across pores and fine lines, then evaporates, leaving the smooth finish behind, which is why a good silicone primer feels like nothing a minute after application. If a primer has ever felt heavy or greasy on you, the cause was usually the rest of the formula.

Serums and lightweight moisturisers use it the same way: as a carrier that lets actives spread evenly without a sticky residue. Sunscreens use it to spread UV filters thinly and evenly, which is why modern matte sunscreens feel dry instead of greasy. Foundations and BB creams use it to disperse pigments evenly so the colour lays down smoothly.

Hair products use it too, and this is where the older name survives most often. Cyclomethicone gives hair serums and leave-in conditioners their slip and shine without weight. If it reaches your forehead or hairline, the same 0 rating applies, but a heavy hair serum can still leave other ingredients behind on skin, so keep leave-in products off your face where you can.

Who Should Use It

Oily and acne prone skin is the best fit. A volatile carrier that evaporates and leaves no greasy layer is exactly what oily skin wants from a primer or sunscreen base, and the 0 rating means the ingredient itself adds no pore clogging risk. If you have been avoiding silicones because you assumed they all sit on the skin like oil, cyclomethicone is the counterexample: it leaves.

Combination skin does well with it too. A cyclomethicone primer gives an even base across oily and dry zones without adding weight to the oily ones.

Very dry skin should use it with a partner, not on its own. Cyclomethicone evaporates, so it adds no lasting moisture and no occlusive layer worth the name. Very dry skin does better with dimethicone or a richer emollient doing the staying work, or with a non-comedogenic moisturizer layered over a cyclomethicone based serum.

Sensitive skin should check the blend before checking the silicone. Cyclomethicone itself is generally described as non-irritating and well tolerated even by sensitive skin. But the products that carry it most often, primers, sunscreens, and foundations, are also the most likely to contain irritating fragrance or preservatives. A plain, fragrance free cyclomethicone product is a low risk version.

When to Be Careful: Trapping and Cleansing

This is the honest limit of the 0. Cyclomethicone itself evaporates, but the silicone film left by its heavier partners does not, and that film can hold other ingredients against your skin.

The trapping mechanism works like this. Cyclomethicone carries a formula onto your skin and evaporates. What stays behind is the rest of the formula: dimethicone film, pigments, sunscreen filters, and any esters or oils in the blend. If one of those remaining ingredients is comedogenic, for example isopropyl myristate at 5, it is now spread thinly and evenly across your skin under a breathable silicone film, and it stays there until you wash it off. The cyclomethicone did not clog your pore. The ingredient it delivered and left behind did, and the film helped keep it in place.

That is also why poor cleansing is the real breakout route with silicone products. Sleeping in a day of primer, sunscreen and makeup, mixed with sebum, gives every ingredient in those layers hours inside your follicles. The fix is simple: double cleanse at night. Use an oil or balm cleanser first to dissolve the silicone film, sunscreen filters and makeup, then your regular cleanser to wash it all away.

Do not expect cyclomethicone to moisturize. It is a carrier, not a moisturiser. And do not assume silicone free is automatically safer: a silicone free primer can still contain coconut derivatives, heavy esters, or fragrance that clog or irritate far more than any silicone would.

The Environmental Note

There is one real restriction on cyclomethicone, and it is often misread as a skin warning, so it is worth describing accurately. D4 and D5 persist in water: the fraction that washes off in the shower does not break down quickly in rivers and lakes, and it can accumulate in aquatic life. For that reason, the European Union restricted D4 and D5 in wash-off cosmetic products to 0.1 percent, and the European Chemicals Agency has classified them as Substances of Very High Concern. That is an environmental rule about what goes down the drain, not a skin safety finding. The Cosmetic Ingredient Review panel deems cyclomethicone safe for cosmetic use. If environmental impact matters to you, that is a fair reason to choose cyclomethicone free products, and it does not change the pore risk reading.

5 Common Mistakes People Make With Cyclomethicone

1. Treating cyclomethicone and cyclopentasiloxane as two different ingredients. They are the family name and one member of that family. Both rate 0, and the distinction matters for reading labels, not for pore risk.

2. Blaming cyclomethicone for a breakout caused by its formula partners. It evaporates and leaves the rest of the formula behind, so if a primer also contains high rated esters, those are the ingredients that stayed on your skin.

3. Assuming silicone free is automatically safer. A silicone free primer can still contain coconut derivatives, heavy esters, or fragrance that clog or irritate far more than any silicone would.

4. Skipping the double cleanse after silicone heavy products. Cyclomethicone evaporates, but dimethicone, sunscreen filters, and makeup do not. Sleeping in those layers mixed with a day of sebum is a far likelier breakout cause than any silicone on the label.

5. Expecting it to moisturize. Cyclomethicone is a carrier, not a moisturiser: it evaporates and leaves no lasting moisture behind, so a cyclomethicone heavy product will never fix dry skin on its own.

How to Check Your Own Products

Look for Cyclomethicone on the label, and note its position. Near the top of a primer, serum, or sunscreen, it is doing the main spreading work, and the product will feel light and dry down fast. Then look at what sits around it: fragrance, essential oils, and high rated esters are the lines that change the verdict.

Also check what it is paired with. Cyclomethicone next to dimethicone is the classic primer team: one spreads, one stays. Cyclomethicone next to isopropyl myristate is a different story, because that ester rates 5 and stays behind after the cyclomethicone leaves. If the label says cyclopentasiloxane or cyclohexasiloxane instead of cyclomethicone, read it the same way: a member of the same family, rated 0, doing the same job.

The fastest check is the one this site exists for: paste the full ingredient list into the free Pore-Clogging Checker and it will flag every ingredient with a pore clogging risk, so you judge the formula you actually bought instead of one word on the label. For the full reference, see the full pore-clogging ingredients list, and for the broader silicone family, the silicones hub collects the site’s silicone ratings in one place.

Check Your Product Before You Trust One Ingredient

Cyclomethicone is rated 0, but your product is a whole formula. Paste the full ingredient list into the free Pore-Clogging Checker and see every pore clogging risk in seconds.

Check My Ingredients Free

Frequently Asked Questions

On its own, yes. It is rated 0 out of 5 and generally considered non-comedogenic, and its volatility means it does not stay in the follicle long enough to plug it. Whether a specific product suits your acne prone skin depends on the rest of the formula and on proper cleansing at night.

By itself, it is not expected to. It is a volatile silicone blend that evaporates within minutes of application, so it does not stay in the follicle long enough to plug it. Breakouts linked to silicone products are usually caused by the other ingredients in the formula, or by sleeping in unwashed layers of primer and makeup.

Not exactly, and the difference matters for labels. Cyclomethicone is the family name for a blend of cyclic silicones, mainly D4, D5 and D6. Cyclopentasiloxane is D5, one member of that family. Both rate 0, and our cyclopentasiloxane guide covers D5 alone in depth.

No. Cyclomethicone is a cyclic, volatile silicone blend that evaporates in minutes and rates 0, while dimethicone is a linear, non-volatile silicone that stays on the skin for hours as a breathable film and rates 1. They are often used together, one to spread the formula and one for lasting smoothness.

Cyclomethicone itself is not a food source for the Malassezia yeast involved in fungal acne, because the yeast feeds on fatty acids and cyclomethicone contains none. That makes it a reasonable choice in a fungal acne routine, but it does not make a whole product safe, and it is not a treatment. Check the other ingredients too.

The restriction is environmental, not a skin safety finding. D4 and D5 persist in water and can accumulate in aquatic life, so the EU limited them to 0.1 percent in wash-off products. The Cosmetic Ingredient Review panel considers cyclomethicone safe for cosmetic use. The two judgements answer different questions.

The Bottom Line

Cyclomethicone earns its 0 honestly: a volatile blend of cyclic silicones that spreads a product thin and evaporates within minutes, leaving nothing of its own behind to clog a pore. It is the carrier, not the culprit, in the primers, serums, and sunscreens that worry acne prone readers most, and its difference from dimethicone is the key to reading any silicone label.

Remember the name for what it is. Cyclomethicone is the family, cyclopentasiloxane is one member of it, and dimethicone is the partner that stays. Its limits are equally honest: it says nothing about the rest of a blend, it adds no moisture of its own, and its EU restriction is environmental, not about your pores. Judge every product by its full ingredient list, cleanse silicone heavy products off at night, and let cyclomethicone do the job it was made for: deliver the product, then disappear.

Check your product before you trust one ingredient. Cyclomethicone is rated 0, but your product is a whole formula. Paste the full ingredient list into the free Pore-Clogging Checker and see every pore clogging risk in seconds.

This article is for educational purposes only and does not constitute medical advice. If breakouts persist or worsen, consult a qualified dermatologist.