Is Dimethicone Crosspolymer Comedogenic?
If you have ever smoothed a primer across your face and watched your pores seem to disappear, you have probably met dimethicone crosspolymer. It is the ingredient behind that soft, blurring, velvety finish, and it sits near the top of many primers, foundations, and BB creams.
The question is a fair one. A primer stays on your face for hours, pressed right against your pores, so an ingredient that forms a film deserves a proper check. The short answer is reassuring, with one honest condition attached.
In This Article
- Quick Answer
- What Dimethicone Crosspolymer Actually Is
- Its Comedogenic Rating, Explained
- Why a Crosslinked Silicone Rates Low
- Dimethicone Crosspolymer vs Dimethicone
- Not the Same as Vinyl Dimethicone Crosspolymer
- Where You Will Find It
- Who Should Use It
- When to Be Careful: Trapping and Cleansing
- 5 Common Mistakes
- How to Check Your Own Products
- Frequently Asked Questions
- The Bottom Line
Quick Answer
Dimethicone crosspolymer is rated 1 out of 5 on the comedogenic scale, the low risk band. It is a silicone elastomer, which means its molecules are linked into a soft, springy network that sits on the surface of the skin as a thin, breathable mesh rather than sinking into pores.
That 1 describes the ingredient on its own. A primer built around dimethicone crosspolymer can still contribute to breakouts, not because the crosspolymer clogs pores, but because the film it forms can trap oil, sweat, and other ingredients underneath it, and because primers are often worn for long hours and removed poorly.
What Dimethicone Crosspolymer Actually Is
Dimethicone crosspolymer is a silicone, a synthetic polymer built on silicon and oxygen rather than carbon. Its INCI name is Dimethicone Crosspolymer. It is made by taking dimethicone, the familiar linear silicone, and linking its chains together with a crosslinking agent. That crosslinking changes the behaviour completely: instead of a flowing oil, you get a soft, powdery gel, sometimes called a silicone elastomer.
Think of the difference this way. Dimethicone is like a pile of loose threads, smooth and slippery. Dimethicone crosspolymer is like those same threads woven into a fine net. The net still feels silky, but it holds its shape, fills in tiny surface lines, and scatters light, which is what creates the blurring effect primers are sold on.
Formulators usually buy it as a gel, the crosspolymer swollen in a carrier silicone such as cyclopentasiloxane or dimethicone, and blend that gel into the product. On a label you will see it listed plainly as Dimethicone Crosspolymer, often near the top of a primer and in the middle of a foundation or BB cream. It is chemically inert, which is why silicones are generally well tolerated, and it contains no fatty acids, so it cannot feed the Malassezia yeast involved in fungal acne. It is not a moisturiser and not an active ingredient: its job is texture and finish, smoothing, blurring, and helping makeup sit evenly and last longer.
Its Comedogenic Rating, Explained
On the widely used 0 to 5 comedogenic scale, dimethicone crosspolymer is rated 1, the second lowest band. That puts it in the same low risk company as dimethicone, phenyl trimethicone, and amodimethicone, and one step above the volatile silicones cyclomethicone and cyclopentasiloxane, which rate 0 because they evaporate. Our silicones hub lists dimethicone crosspolymer at 1 out of 5.
The provenance of that number matters, so here it is plainly. There is no Fulton 1989 rating for dimethicone crosspolymer, and this guide does not invent one. The 1 is a consensus working rating drawn from the references that do cover this ingredient family:
| Source | Rating given | Basis |
|---|---|---|
| Site’s own Silicones hub | 1 out of 5 | Low risk on skin, primer silicone elastomer |
| Deascal, dimethicone/vinyl dimethicone crosspolymer | 1 out of 5 | Crosslinked silicone elastomer, unlikely to clog pores |
| Glooshi, vinyl dimethicone/lauryl dimethicone crosspolymer | 1 out of 5 | Sits on the surface in a breathable mesh |
| Glooshi, divinyldimethicone/dimethicone crosspolymer | 0 out of 5 | Molecule too large to penetrate skin deeply |
| MySkinRecipes, silicone gel (vinyl dimethicone crosspolymer) | No number, described as non-comedogenic | Large molecules form a breathable film on the surface |
The range across references is 0 to 1, and every source agrees on the same conclusion: low risk, unlikely to clog pores on its own. The rating of 1 is the cautious reading of that range, and it is the number this site uses so it stays consistent with the hub.
For comparison, mineral oil rates 0, grapeseed oil rates 1, and coconut oil rates 4.
Know what a 1 can and cannot promise. The ratings quoted online trace back to older testing, including rabbit ear tests from the 1980s, and rabbit skin is far more reactive than human skin. There is no single universally validated consumer scale, so a 1 is strong reassurance, not a guarantee. Our guide to what comedogenic means covers those limits.
Do not let a brand page rewrite the scale. Note that “non comedogenic” has no regulated definition: brands assign it themselves. Believe the rating and the full formula, not the front label claim.
Why a Crosslinked Silicone Rates Low
A pore clogs when something stays inside it long enough to mix with sebum and dead skin and block the follicle. Dimethicone crosspolymer does not get that chance, for three reasons.
First, size. Crosslinking joins many dimethicone chains into one large network, and that network is far too big to slip into a pore. Instead it spreads across the surface as a thin mesh, which is exactly the behaviour that blurs the look of pores without filling them with anything that stays.
Second, it is not a food source and it is not reactive. It contains no fatty acids, so it does not feed the yeast involved in fungal acne, and it is chemically inert, which is why silicones are generally described as non-irritating.
Third, the film is breathable. Like other silicones, the crosspolymer mesh lets oxygen and water vapor pass through. It does not suffocate skin, and on its own it does not trap sebum underneath it the way a heavy occlusive layer can. The trapping risk comes from what is layered with it and how long it is worn.
Dimethicone Crosspolymer vs Dimethicone
Readers often treat the two as one ingredient because the names overlap. They are related, but the crosslinking changes what each one does on skin.
| Property | Dimethicone Crosspolymer | Dimethicone |
|---|---|---|
| What it is | Crosslinked silicone elastomer, a soft gel network | Linear silicone chain, a flowing oil |
| Feel | Powdery, velvety, blurring | Silky, smooth, cushioning |
| Main job | Blur pores, mattify, extend makeup wear | Smoothing film, barrier support |
| Volatility | Non-volatile, stays on skin | Non-volatile, stays on skin for hours |
| Where you find it | Primers, foundations, BB creams | Moisturisers, primers, serums, sunscreens |
| Comedogenic rating | 1 out of 5 | 1 out of 5 |
Both rate 1, and the practical rule is simple: dimethicone is the smoothing silicone oil, and dimethicone crosspolymer is the blurring silicone gel made from it. If a primer lists both, that is normal: one brings the slip, the other brings the blur. For the full picture, read our dimethicone guide.
Not the Same as Vinyl Dimethicone Crosspolymer
Three similar names appear on labels, and they are not interchangeable. Dimethicone Crosspolymer is the plain crosslinked elastomer covered in this guide. Vinyl Dimethicone Crosspolymer, often written as Dimethicone/Vinyl Dimethicone Crosspolymer, is a related elastomer made with a vinyl crosslinker, and references rate it 1 out of 5 as well. Divinyldimethicone/Dimethicone Crosspolymer is another variant, rated 0 out of 5 by Glooshi. The pore risk reading is similar across all three, but a checker result for one does not automatically apply to another, so paste the exact name from your label into the free checker.
Where You Will Find It
Primers are its home territory. A pore blurring or pore minimising primer is usually dimethicone crosspolymer doing the main work: the gel network fills in the look of pores and fine lines, scatters light, and gives foundation something smooth to grip. If a primer feels powdery and velvety rather than oily, the crosspolymer is likely the reason.
Foundations and BB creams use it to spread pigment evenly and keep the finish smooth for hours. Tinted moisturisers and long wear concealers use smaller amounts for the same blurring effect, and some sunscreens use it to spread UV filters thinly and keep the formula from feeling greasy.
Its position on the list tells you how much is there: near the top of a primer, it is the star, and near the bottom of a moisturiser, it is a finishing touch.
Who Should Use It
Oily and acne prone skin can usually use it without worry. A large molecule network that sits on the surface and rates 1 adds little pore clogging risk on its own, and the mattifying, blurring finish is genuinely useful for oily skin, since it reduces shine without adding oil.
Dry skin gets a smaller benefit: the mesh smooths rough texture and helps makeup sit evenly, but it does not moisturise, so very dry skin should still layer a proper moisturiser underneath. Combination skin does well with it too, especially as a primer on the T-zone where pores are most visible. Sensitive skin should check the blend before the silicone: the crosspolymer itself is generally described as non-irritating, but primers often contain fragrance or drying alcohols, so a plain, fragrance free product is the low risk version.
When to Be Careful: Trapping and Cleansing
This is the honest limit of the 1: dimethicone crosspolymer itself rarely clogs a pore, but the mesh it forms can hold other ingredients against your skin. If you layer it over a rich oil or under a heavy foundation, or if the product contains high rated esters, those ingredients sit under that mesh, held close to your skin for hours. The crosspolymer did not clog your pore. The ingredient it trapped did.
Heavy, long wear formulas raise the risk further. A primer plus a full coverage foundation plus a setting spray, worn for 12 hours or more, is a thick stack of film formers, and on oily or acne prone skin that stack can hold sebum and dead skin against the follicle opening long enough for small clogs to form.
Poor cleansing is the real breakout route with film-forming products. Sleeping in a day of primer, foundation, and sunscreen, mixed with sebum, gives every ingredient in those layers hours inside your follicles. The fix is simple: double cleanse at night, with an oil or balm cleanser first, then your regular cleanser.
Do not expect dimethicone crosspolymer to moisturise: it is a blurring and texture agent, not a moisturiser. And do not assume silicone free is automatically safer: a silicone free primer can still contain heavy esters, waxes, or fragrance that clog or irritate far more than any silicone would.
5 Common Mistakes People Make With Dimethicone Crosspolymer
- Treating a 1 as a 0 and ignoring the formula. Always judge the full ingredient list, especially the esters and waxes in a primer.
- Confusing it with vinyl dimethicone crosspolymer. Similar names, different molecules. Both rate low, but a checker result for one does not apply to the other.
- Blaming dimethicone crosspolymer for a breakout caused by its formula partners. If a primer also contains high rated esters, those stayed on your skin under the mesh.
- Wearing a full stack of film formers for very long hours without a break. Primer plus heavy foundation plus setting spray, worn all day every day, is a trapping risk no single ingredient rating captures.
- Skipping the double cleanse after primer and long wear makeup. Sleeping in those layers mixed with a day of sebum is a far likelier breakout cause than any silicone on the label.
How to Check Your Own Products
Look for Dimethicone Crosspolymer on the label and note its position. Near the top of a primer, it is doing the main blurring work. In a foundation, it is one of several texture agents, so the rest of the list matters more. Then look at what sits around it: isopropyl myristate, which rates 5, is the usual suspect in primers that break people out.
The fastest check is the one this site exists for: paste the full ingredient list into the free Pore-Clogging Checker and it will flag every ingredient with a pore clogging risk. For the full reference, see the full ingredients list and the silicones hub.
Check Any Primer in Seconds
Paste a primer or foundation ingredient list into the free Pore-Clogging Ingredient Checker and see every silicone and hidden ester flagged with its 0 to 5 rating.
Check Your Ingredients FreeFrequently Asked Questions
On its own, yes. It is rated 1 out of 5 and widely described as non-comedogenic. Whether a specific primer suits you depends on the rest of the formula, how long you wear it, and how well you cleanse it off at night.
By itself, it is not expected to. It forms a thin, breathable mesh on the surface rather than penetrating into pores. Breakouts linked to products containing it are usually caused by the other ingredients, by very long wear, or by sleeping in unwashed primer and makeup.
No, but they are close relatives. Dimethicone is the plain linear silicone oil, while dimethicone crosspolymer is dimethicone with its chains linked into a soft gel network. Both rate 1 out of 5. The crosspolymer feels powdery and blurring, while dimethicone feels silky and smooth.
No. Vinyl dimethicone crosspolymer is a related elastomer made with a vinyl crosslinker. References rate it 1 out of 5 as well, so the pore risk reading is similar, but the ingredients are different, so check the exact name from your label.
It is not a food source for the Malassezia yeast involved in fungal acne, because the yeast feeds on fatty acids and dimethicone crosspolymer contains none. That makes it reasonable in a fungal acne routine, but it does not make a whole primer safe, since primers often contain esters and other ingredients that matter more.
Because it stays. Cyclomethicone and cyclopentasiloxane rate 0 because they evaporate within minutes and leave nothing behind. Dimethicone crosspolymer is non-volatile, so it remains on the skin as a mesh. That mesh is thin and breathable, which keeps the rating low, but it can trap other ingredients underneath it, which is why it sits at 1 rather than 0.
The Bottom Line
Dimethicone crosspolymer earns its 1 honestly: a large, crosslinked silicone network that sits on the surface, blurs the look of pores, and forms a thin, breathable mesh, without sinking into pores. Its difference from plain dimethicone is the key to reading any primer label: one is the smoothing oil, the other is the blurring gel made from it.
Check your product before you trust one ingredient. Dimethicone crosspolymer is rated 1, but your product is a whole formula. Paste the full ingredient list into the free Pore-Clogging Checker and see every pore clogging risk in seconds.
This article is for educational purposes only and does not constitute medical advice. If breakouts persist or worsen, consult a qualified dermatologist.