Is Dimethiconol Comedogenic?

Dimethiconol is the silicone you have probably used without noticing its name. It is behind the glassy shine in a hair serum, the slip in a smoothing primer, and the silky finish in a silicone heavy face serum. It sits one letter away from dimethicone on the label, and most of the internet treats the two as the same ingredient.

On this site, dimethiconol is rated 1 out of 5, a cautious consensus rating. Dimethiconol was never tested in James Fulton’s 1989 rabbit ear study, the source of the famous 0 to 5 ratings, so the 1 is not a lab measured Fulton value. It is the rating secondary charts give it, backed by Fulton’s 0 rating for its closest relative, dimethicone.

Quick Answer

Dimethiconol is rated 1 out of 5 on this site, which puts it in the low risk band. Its molecules are large, so they sit on the skin as a breathable film instead of sinking into pores. For most people, including most acne prone people, products containing dimethiconol are unlikely to clog pores.

The 1 is chart consensus, not a Fulton result, because dimethiconol does not appear in Fulton’s 1989 testing. The film it forms can trap debris against the skin if cleansing is poor, which is why the rating is 1 rather than 0.

1/5
Comedogenic Rating

Cautious consensus, not a Fulton result

Large molecules that sit on the surface. Low risk for most skin, with one point of caution.

What Dimethiconol Actually Is

Dimethiconol is a silicone polymer, a hydroxyl terminated polydimethylsiloxane. In plain language, it is dimethicone with hydroxyl groups, written as OH groups, at the ends of its chains. Those end groups change how it behaves: dimethiconol forms a heavier, glossier, more persistent film than standard dimethicone, which is why formulators use it for shine and staying power.

You will most often find it in hair care: serums, shine sprays, leave-in conditioners, and heat protectants, where it coats each strand, smooths the cuticle, and cuts frizz. In skincare it appears in silicone serums, primers, and foundations, usually in modest amounts. Dimethiconol contains no oil, so it adds no fat for skin bacteria to feed on.

Its Comedogenic Rating, Explained

The 0 to 5 scale traces back to Fulton’s 1989 rabbit ear testing, in which ingredients were applied to rabbit ears and follicle plugging was measured. Our guide to the comedogenic scale explains the limits of that method. The short version: rabbit skin is far more reactive than human skin, and the tests used pure ingredients at high concentrations.

Dimethiconol was not one of the ingredients Fulton tested, so any page that ties a dimethiconol rating to Fulton is guessing. Here is what the sources actually say.

SourceRatingBasis
Glooshi ingredient page1Large molecules sit on the surface as a breathable film, with a slim chance of trapping debris
Elkay Silicones supplier FAQNon-comedogenicCalls the cyclopentasiloxane and dimethiconol blend non-comedogenic, notes CIR safety review
Fulton 1989, dimethicone0 comedogenicity, 0 irritancyClosest relative, tested directly; dimethiconol was not tested
Our own Silicones hub1Cautious consensus from secondary charts and the dimethicone result

The 1 is the cautious reading. Some sources call dimethiconol flatly non-comedogenic, which would suggest a 0, but the trapping concern and the absence of direct testing argue for keeping one point of caution. A rating of 1 is strong reassurance, not a guarantee.

Dimethiconol vs Dimethicone

Dimethicone is a silicone oil, polydimethylsiloxane, with methyl groups capping the ends of its chains. It is the workhorse silicone of skincare: light, silky, and used everywhere from moisturizers to sunscreens. Fulton tested it directly and rated it 0 for comedogenicity and 0 for irritancy, and the Cosmetic Ingredient Review concluded in 2021 that dimethicone and related polymers are safe in cosmetics as used. Our dimethicone guide covers that evidence.

Dimethiconol is dimethicone with hydroxyl groups at the chain ends instead of methyl groups. That small change makes the film heavier, glossier, and more persistent. Hair care writers call dimethiconol the silicone most often behind the “my hair feels coated” complaint, and note it can take more than one wash to remove.

For pore clogging risk, the difference is small. Both are large molecules that sit on the skin surface, and both are described as non-comedogenic. This guide rates dimethiconol 1 while Fulton rated dimethicone 0 for one reason: evidence. Dimethicone was tested and earned its 0, while dimethiconol was never tested, so the honest rating carries one point of caution for the missing test.

Dimethiconol vs Cyclopentasiloxane

Cyclopentasiloxane is the other silicone dimethiconol is most often paired with: a volatile silicone that evaporates after application. Our cyclopentasiloxane guide rates it 0 out of 5. Dimethiconol is the opposite: non-volatile, large, and persistent, so in the common blend cyclopentasiloxane is the delivery vehicle and dimethiconol is the ingredient that stays. For acne prone skin, the practical difference is removal: cyclopentasiloxane largely removes itself, while dimethiconol depends on your cleanser.

The Trapping Concern, Answered Honestly

If dimethiconol does not enter pores, why does anyone blame it for breakouts? The answer is the trapping concern, and it deserves an honest hearing.

Dimethiconol forms a water resistant film. That film is gas permeable, so oxygen and water vapour pass through it and it does not suffocate the skin. But it slows the escape of sebum, dead skin cells, and other ingredients underneath it. If those trapped materials include something comedogenic, the film holds it against your skin for longer, and a breakout follows. The silicone gets blamed, but the trapped ingredient did the clogging.

Three things keep this concern in proportion. The film is thin and breathable, not the heavy seal of petrolatum. Trapping only becomes a problem when cleansing is poor, since the film is meant to be washed off at night. The practical rule is simple: wash dimethiconol products off properly every night, ideally with a double cleanse.

The Acne Question

Dimethiconol is generally suitable for acne prone skin, with the same caveats that apply to every silicone. It does not feed acne bacteria, it does not break down into pore clogging fatty acids, and it was not shown to cause comedones in the testing that exists for its family.

That does not mean every acne prone person will love every dimethiconol product. Skin responses vary, and a few people find their skin prefers silicone free formulas. If a dimethiconol primer or serum breaks you out, check the other ingredients first, especially esters such as isopropyl myristate, which rates 5 out of 5.

The Fungal Acne Note

Dimethiconol is neutral for fungal acne. Malassezia yeast feeds on fatty acids in the C11 to C24 range, and dimethiconol contains no fatty acids at all: it is a silicone polymer built on silicon and oxygen, with no carbon chains for the yeast to feed on.

The caution is about the formula, not the ingredient. A serum or primer that contains dimethiconol may also contain oils, esters, or fatty alcohols that do feed Malassezia. Dimethiconol itself is fungal acne neutral, but a product containing it is only fungal acne safe if everything else in the formula is safe too.

Wash-Off vs Leave-On

Where dimethiconol sits in your routine changes how much it matters. In wash-off products such as shampoos, most rinses away, so this is the lowest concern version of the ingredient. In leave-on hair serums, dimethiconol stays on the hair for hours against the forehead and neck, so keep it off the roots and cleanse the hairline at night. In leave-on skin products such as primers, it sits directly on the face until you wash it off, which is where concentration matters most.

Where It Works Best

Dimethiconol earns its place in products that need staying power and shine. In hair care, it suits very dry, damaged, or frizzy hair that needs a glossy, smoothing coat. Fine hair is the exception: the same film that tames thick hair can weigh fine hair down and make it look flat. In skincare, it suits primers and long wear makeup, where its job is to fill fine lines, blur texture, and hold foundation in place.

Who Should Be Careful

If your skin is very oily or congestion prone, dimethiconol is not the first ingredient to blame, but heavy leave-on layers of it every night, without proper cleansing, are the use pattern most likely to cause problems. Lighter silicones suit oily skin better: cyclopentasiloxane at 0, which evaporates, and dimethicone at 0 to 1 in published references. If your skin is sensitive, patch test first: inner arm for 24 hours, then one cheek for several days.

Dimethiconol vs Other Common Silicones

IngredientComedogenic ratingFeel on skinBest for
Dimethiconol1Heavy, glossy, persistent filmHair serums, primers, long wear makeup
Dimethicone0 to 1Silky, smoothing, light barrierPrimers, serums, sensitive skin
Cyclopentasiloxane0Light, evaporates quicklyCarrying product on, then disappearing
Phenyl trimethicone1Glossy, spreadableShine and spreadability
Amodimethicone1Targeted conditioning, binds to damaged hairHair care, damaged areas

Dimethiconol at 1 sits beside phenyl trimethicone and amodimethicone at 1, but the three behave differently: phenyl trimethicone is the shine silicone, amodimethicone targets damaged hair, and dimethiconol is the persistent film that stays put. See the Silicones hub and the pore-clogging ingredients list for the full reference.

4 Common Mistakes People Make With Dimethiconol

1. Treating dimethiconol and dimethicone as the same ingredient. They are close relatives with different chain ends. Dimethiconol forms the heavier, more persistent film.

2. Treating the 1 as a Fulton result. Dimethiconol was not in Fulton’s 1989 testing, so the 1 is cautious consensus, weaker evidence than a direct test.

3. Blaming the silicone for a breakout caused by the formula. Dimethiconol rarely appears alone. Check the ingredients beside it first, especially high rated esters, and check your cleansing before dropping the product.

4. Sleeping in unwashed silicone layers. The trapping concern is real, and it is a cleansing problem, not an ingredient problem. Primer, sunscreen, and makeup need a proper evening cleanse.

How to Check Your Own Products

Look for Dimethiconol on the label, and note its position and its neighbours. Near the top of a primer or hair serum, it is doing the main work. If it appears beside isopropyl myristate, ethylhexyl palmitate, or another high rated ester, that ester is the ingredient to worry about, not the silicone. Paste the full ingredient list into the free Pore-Clogging Checker and it will flag every ingredient with a pore clogging risk, so you see the whole formula instead of judging one name.

Check Your Product Before You Trust One Ingredient

Dimethiconol is rated 1, but your product is a whole formula. Paste the full ingredient list into the free Pore-Clogging Checker and see every pore clogging risk in seconds.

Check My Ingredients Free

Frequently Asked Questions

Generally yes, with proper cleansing. It is rated 1 out of 5, its molecules are too large to enter pores, and it adds no fatty acids for acne bacteria to feed on. Trouble usually comes from heavy leave-on layers, poor cleansing, or another ingredient in the same formula.

Most sources describe it as non-comedogenic, and this site rates it 1 out of 5, the low risk band. The honest description is low risk rather than zero risk, because it was never directly tested and its film can trap debris if cleansing is poor.

No. Dimethiconol is a hydroxyl terminated dimethicone polymer that forms a heavier, glossier, more persistent film, used most in hair serums and long wear primers. Both sit in the same low risk silicone family, and Fulton rated dimethicone 0 for comedogenicity.

The ingredient itself is neutral for fungal acne, because it contains no fatty acids in the C11 to C24 range that Malassezia feeds on. A product containing it is only fungal acne safe if the rest of the formula is safe too.

It can contribute, indirectly. Coated hair rests against the forehead all day, transferring film and trapping sebum. Keep serums on the lengths and ends, away from the roots and hairline, and cleanse the hairline at night.

The Bottom Line

Dimethiconol earns its 1 honestly, with an asterisk: a low risk silicone polymer in the same family as dimethicone, rated by secondary charts and family evidence rather than by direct Fulton testing, because it was never in Fulton’s 1989 study.

Use it for what it is good at: shine and staying power in hair serums, smoothing in primers, and a sealing finish in silicone serums. Wash it off properly every night, keep hair serums away from the roots and hairline, and judge the whole formula rather than one name on the label.

This article is for educational purposes only and does not constitute medical advice. If breakouts persist or worsen, consult a qualified dermatologist.